Product overview

BA Pump series single stage single suction cantilever centrifugal pump, for the suction and delivery of water and physical and chemical properties similar to the water of the liquid.

Product characteristics

The pump relies on a high-speed rotating impeller, and the liquid gains energy under the action of inertial centrifugal force to increase the pressure. Before the pump works, the pump body and the inlet pipe must be filled with water to prevent cavitation. When the impeller rotates rapidly, the blade causes the water to rotate quickly, and the rotating water flies away from the impeller under the action of centrifugal force. After the water in the pump is thrown out, the central part of the impeller forms a vacuum area. The water in Suwon is pressed into the inlet pipe through the pipe network under the action of atmospheric pressure (or water pressure). In this way, continuous pumping can be achieved.

Product use

The **** temperature of the liquid of the pump shall not exceed 80℃, which is suitable for factories, mines, urban water supply and farmland irrigation.

Type meaning

For example, 4 BA-12 A

4 - Suction diameter 25 (i.e. the suction blade diameter of the pump is 100 mm)

BA - Single stage single suction cantilever centrifugal clean pump

12 - The specific revolution is divided by 10 (i.e. the specific revolution of the pump is 120)

A - indicates that the pump has replaced the impeller with a different outside diameter